防靜電國家標準及資料

2015年05月19日

防靜電國家標準及資料

一、國家標準(GB,GB/T,GBJ)

 GBJ 79-1985           工業企業通信接地設計規范

 GB 6951-1986           輕質油品裝油安全油面電位值

 GB/T 6833.3-1987         電子測量儀器電磁兼容性試驗規范靜電放電敏感度試驗

 GB/T 11210-1989         硫化橡膠抗靜電和導電制品電阻的測定

 GB 12014-1989          防靜電工作服

 GB/T 1410-1989          固體電工絕緣材料體積電阻率及表面電阻率試驗方法

 GB 12158-1990          防止靜電事故通用導則

 GB/T 12582-1990         液態烴類電導率測定方法 ( 精密靜電計法 )

 GB/T 12703-1991         紡織品靜電測試方法

 GB 13348-1992          液體石油產品靜電安全規程

 GB/T 14288-1993         可燃氣體與易燃液體蒸氣最小靜電點火能測定方法

 GB/T 50174-1993         計算機機房設計規范

 GB 4385-1995           防靜電鞋、導電鞋技術要求

 GB/T 15463-1995         靜電安全名詞術語

 GB/T 6539-1997          航空燃料與餾分燃料電導率測定法

 GB/T 2439-2001          硫化橡膠或熱塑性橡膠導電性能和耗散性能電阻率的測定

 GB/T 2887-2000          電子計算機場地通用規范

 GB 6950-2001           輕質油品安全靜止電導率

 GB 4655-2003           橡膠工業靜電安全規程

二、國家軍用標準(GJB)

 GJB/Z 25-1991          電子設備和設施的接地、搭接和屏蔽設計指南

 GJB 1649-1993          電子產品防靜電放電控制大綱

 GJB 2527-1995          彈藥防靜電要求

 GJB 2605-1996          柔性熱密封防靜電阻隔材料規范

 GJB 3007-1997          防靜電工作區技術要求

 GJB/Z 86-1997          靜電放電防護包裝手冊

 GJB/Z 105-1998         電子產品防靜電放電控制手冊

三、電子行業標準(SJ,SJ/T)

 SJ/T 10147-1991         集成電路防靜電包裝管

 SJ 20154-1992          信息技術設備靜電放電敏感度試驗

 SJ/T 10533-1994         電子設備制造防靜電技術要求

 SJ/T 10630-1995         電子元器件制造防靜電技術要求

 SJ/T 10694-1996         電子產品制造防靜電系統測試方法

 SJ/T 11159-1998         地板覆蓋層和裝配地板靜電性能的試驗方法

 

國外靜電相關標準 ESD standards

ESD S1.1:1998—Evaluation, acceptance, and functional
testing of wrist straps.
 

ESD STM2.1:1997
—Resistance
test method for electrostatic discharge protective garments.
 

ESD STM3.1:2000
—Ionization. 

ESD SP3.3:2000
—Periodic
verification of air ionizers.
 

ESD S4.1:1997
—Worksurfaces—Resistance measurements. 

ESD STM4.2:1998
—Worksurfaces—Charge dissipation characteristics. 

ANSI/ESD STM5.1:2001
—Electrostatic
discharge sensitivity testing—Human body model.
 

ANSI/ESD STM5.2:1999
—Electrostatic
discharge sensitivity testing—Machine model.
 

ANSI/ESD STM5.3.1:1999
—Charged
device model (CDM)—Component level.
 

ESD S6.1:1999
—Grounding—Recommended practice. 

ANSI ESD S7.1:1994
—Floor
materials—Resistive characterization of materials.
 

ANSI ESD S8.1:1993
—ESD
awareness symbols.
 

ESD S9.1:1995
—Resistive
characterization of footwear.
 

ESD SP10.1:2000
—Automated
handling equipment.
 

ANSI ESD S11.11:1993
—Surface
resistance measurement of static dissipative planar materials.
 

ESD STM11.12:2000
—Volume
resistance measurement of static dissipative planar materials.
 

ANSI ESD S11.31:1994
—Evaluating
the performance of electrostatic discharge shielding bags.
 

ESD STM12.1:1997
—Seating-resistive
characterization.
 

ESD STM13.1:2000
—Electrical
soldering/desoldering hand tools.
 

ANSI ESD S20.20:1999
—Standard
for the development of an ESD control program.
 

ESD STM97.1:1999
—Floor
materials and footwear—Resistance in combination with a
person.
 

ESD STM97.2:1999
—Floor
materials and footwear voltage measurement in combination with a person.
 

AFLCR 65-8:1998
—Maintenance—Engineering and supply: Electrostatic discharge (ESD) control
program.
 

ANSI C63.14:1998
—American
national standard dictionary for technologies of electromagnetic compatibility
(EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD)—Dictionary of EMC/EMP/ESD terms and definitions.
 

ANSI C63.16:1993
—American
national standard guide for electrostatic discharge test methodologies and
criteria for electronic equipment.
 

ANSI N322:1997
—American
national standard inspection, test, construction, and performance requirements
for direct reading electrostatic/electroscope–type
dosimeters.
 

ANSI T1.308:1996
—Central
office equipment—Electrostatic discharge immunity
requirements.
 

ASQ P672:1996
—Auditing
ESD and cleanroom processes.
 

ASTM D257-78
—Standard
test methods for dc resistance or conductance of insulating materials.
 

ASTM D991-83
—Standard
test method for rubber properties—Volume resistivity of
electrically conductive and antistatic products.
 

ASTM D5077-90:1997
—Standard
terminology relating to electrostatic discharge (ESD) packaging materials.
 

ASTM E1549-95:2000
—Standard
specification for ESD-controlled garments required in cleanrooms and controlled
environments for spacecraft for nonhazardous and hazardous operations.
 

ASTM F150-98
—Standard
test method for electrical resistance of conductive and static dissipative
resilient flooring.
 

ASTM F1812-97a
—Standard
test method for determining the effectiveness of membrane switch ESD shielding.
 

Bellcore GR-1421-CORE:1995
—Generic
requirements for ESD-protective circuit packet containers.

BS 6654:1985—Method for determination of the electrical
resistivity of textile floor coverings.
 

BS EN 100015-2:1994
—Basic
specification—Protection of electrostatic-sensitive
devices—Requirements for low-humidity conditions.
 

BS EN 100015-3:1994
—Basic
specification—Protection of electrostatic-sensitive
devices—Requirements for cleanroom areas.
 

BS EN 100015-4:1994
—Basic
specification—Protection of electrostatic-sensitive
devices—Requirements for high-voltage environments.
 

BS EN 1149-1:1996
—Protective
clothing—Electrostatic properties—Surface resistivity (test methods and requirements).
 

BS EN 1149-2:1997
—Protective
clothing—Electrostatic properties—Test method for measurement of the electrical resistance through a
material (vertical resistance).
 

BS EN 1718:1999
—Light
conveyor belts—Test method for the measurement of the
electrostatic field generated by a running light conveyor belt.
 

DI-ATTS-80285B:1997
—Engineering
support data (ESD).
 

DI-RELI-80669:1992
—Electrostatic
discharge (ESD) control program flag.
 

DI-RELI-80671:1992
—Handling
procedures for electrostatic discharge (ESD) sensitive items.
 

EIA 471:1980
—Symbol
and label for electrostatic sensitive devices.
 

EIA 541:1988
—Packaging
material standards for ESD-sensitive items.
 

EIA 541:1990
—Packaging
of electronic products for shipment.
 

EIA 545:1989
—Electromechanical
switch test method for electrostatic discharge (ESD).
 

EIA 625
—Handling
electrostatic discharge sensitive (ESDS) devices.
 

EIA-JEP 108
—Distributor
requirements for handling electrostatic discharge sensitive (ESDS) devices.
 

EOS/ESD EP102:1988
—Electrostatic
discharge and electronic equipment: A practical guide for designing to prevent
ESD problems.
 

EOS/ESD EP103:1990
—ESD
program management: A realistic approach to continuous, measurable improvement
in static control.
 

EOS/ESD EP105:1995
—ESD
in silicon integrated circuits.
 

ESD 1:2000
—General
practices for ESD control for MR and GMR heads.
 

IEC 60801-2:1991
—Electromagnetic
compatibility for industrial-process measurement and control equipment—Electrostatic discharge requirements.
 

IEC 61000-4-2:1995
—Electromagnetic
compatibility (EMC)—Part 4: Testing and measurement
techniques—Section 2: Electrostatic discharge immunity
test.
 

IEC 61000-4-2:1999
—Electromagnetic
compatibility (EMC)—Part 4-2: Testing and measurement
techniques—Electrostatic discharge immunity test.
 

IEC 61087:1991
—Guide
for evaluating the discharges from a charged surface.
 

IEC 61340-1:1998
—Electrostatics—Part 1: Guide to the principles of electrostatic phenomena
(IEC/101/35/CD).
 

IEC 61340-2-2TR3:2000
—Electrostatics—Part 2-2: Measurement methods—Measurement of
chargeability.
 

IEC 61340-2-3:2000
—Electrostatics—Part 2-3: Methods of test for determining the resistance and
resistivity of solid planar materials used to avoid electrostatic charge
accumulation.
 

IEC 61340-3-1:1998
—Electrostatics—Part 3-1: Methods for simulation of electrostatic effects—Human body model (HBM)—Component testing
(IEC/101/33/CD).
 

IEC 61340-3-2:1998
—Electrostatics—Part 3-2: Methods for simulation of electrostatic effects—Machine model (MM)—Component testing
(IEC/101/34/CD).
 

IEC 61340-4-1:1995
—Electrostatics—Part 4: Standard test methods for specific applications—Section 1: Electrostatic behavior of floor coverings and installed
floors.
 

IEC 61340-4-3:1999
—Test
method for the characterization of electrostatic protective footwear (IEC
document 101/62/CD).
 

IEC 61340-5-1TR2:1998
—Electrostatics—Part 5-1: Protection of electronic devices from electrostatic
phenomena—General requirements.
 

IEC 61340-5-2TR2:1999
—Electrostatics—Part 5-2: Protection of electronic devices from electrostatic
phenomena—User guide.
 

IEC/PAS 62162:2000
—Field-induced
charged-device model test method for electrostatic discharge withstand
thresholds of microelectronic components.
 

IEC/PAS 62179:2000
—Electrostatic
discharge (ESD) sensitivity testing human body model (HBM).

IEC/PAS 62180:2000—Electrostatic discharge (ESD)
sensitivity testing machine model (MM).
 

IEEE C62.38:1994 (R1999)
—IEEE
guide on electrostatic discharge (ESD)—ESD withstand
capability evaluation methods (for electronic equipment subassemblies).
 

IEEE C62.47:1992
—IEEE
guide on electrostatic discharge (ESD)—Characterization
of the ESD environment.
 

ISO/DIS 10605:2000
—Road
vehicles—Test methods for electrical disturbances from
electrostatic discharge.
 

ISO/TR 10605:1994
—Road
vehicles—Electrical disturbances from electrostatic
discharge.
 

JESD 22-A114-B:2000
—Electrostatic
discharge (ESD) sensitivity testing human body model (HBM).
 

JESD 22-A115-A:1997
—Electrostatic
discharge (ESD) sensitivity testing machine model (MM).
 

JESD 22-C101-A:2000
—Field-induced
charged-device model test method for electrostatic discharge withstand
thresholds of microelectronic components.

MIL-PRF-87893B:1997—Workstation—Electrostatic discharge (ESD) control.
 

QPL-87893-1:1995
—Workstation
electrostatic discharge (ESD) control.
 

RAC SOAR 6:1986
—ESD
control in the manufacturing environment.
 

SAE J551/15:1995
—Vehicle
electromagnetic immunity—Electrostatic discharge (ESD).

 

來源:萍鄉市盾斯特科技有限公司
產品名
價格
og视讯是什么